Machine introduction

◇ The whole machine adopts integrated control technology, printing, paste box online control, and unified order management, review, improve production efficiency.

◇ Perfect tracking and detection technology, when the sticky box has card paper and other faults, the printing opportunity to automatically stop the paper delivery function.

◇ Cardboard folding down.

◇ both sides of the deviation belt speed adjustment, effectively correct the fish tail phenomenon.

◇ falling counting out section.

◇ Paste box linkage line eight servo control system.

◇ Optional pipe system: can connect the production management system, support remote access, control the execution of the machine, effectively integrate the existing resources of the enterprise, improve management efficiency.

\

Argument

Machine parameter

Project	HFG-2000	HFG-2400		HFG-2800
	920	924	1224	1228	1628
Gluing Max speed(pcs/min)	300		260		160
Min folder size A(mm)	180		200		240
Min folder size B(mm)	150		180		200
Main roller the Min distance C(mm)	330		380		440
Min stacking width E (mm)	280		320		400
Min stacking width E (mm)	900		1200		1600
Min Sheet size H(mm)	660		760		880
Min Sheet size H(mm)	2000	2400		2800
Flap width F(mm)	40
Cardboard thickness(mm)	1.6-8

Printing Sample

Detailed introduction

Paper Feeding Unit

◇ Servo motor independent drive, no gear clearance wear, long life, high precision.
◇ Vacuum adsorption front paper, frequency conversion control air volume, paper stable and accurate.
◇ Extension paper delivery system, according to the length of the cardboard, determine the paper delivery travel size, improve the accuracy of paper delivery.
◇ Pressure-free paper delivery system to avoid the destruction of the cardboard transmission process and ensure the compressive strength of the original cardboard.
◇ The whole machine automatic zero system, storage of common orders, quick order change, convenient operation.
◇ Widening dust removal device, in addition to electrostatic brush, can remove the cardboard surface dust, improve the printing quality.
◇ Left and right baffle, back support are computer control, precision guidance mechanism, smooth displacement, with side shot function.

Printing Unit 

◇ The whole process of vacuum adsorption, combined with the ceramic paper delivery wheel transfer system.
◇ Frequency conversion adjustment adsorption wind force, but also according to the length of the cardboard automatically adjust the switch of the air valve.
◇ Closed scraper with ceramic mesh roller, to achieve high dot precision printing, scraper uniform force, simple adjustment and maintenance.
◇ Pneumatic double diaphragm pump, fast cleaning function, ink supply, circulation is stable, simple operation and maintenance.
◇ Quick replacement of rubber roller, net roller device, with quick replacement support.
◇ Wipe the version of the memory, automatic reset system.
◇ Optional: tilt correction roll, the tilt error of the plate can be quickly corrected on the plate roll, hanging the plate is convenient and fast.

Die-cutting unit 

◇ Equipped with imported quick change polyurethane felt sleeve, easy to replace, with one-way clutch as line speed compensation function, can ensure that the mold cut after the felt wear is completely the same.
◇ Working die-cut felt sleeve drum mechanical spiral left and right automatic transverse movement (± 20mm), so that the incision knife mark is not repeated, prolong the service life of the felt sleeve.
◇ The gap between the felt roller and the die-cut roll is controlled pneumatically. When the felt roller drops to the working position, and the felt roller rises automatically rise when the feeding is stopped.
◇ Felt sleeve correction mechanism, increase the number of rubber pad use, reduce consumption.
◇ The bottom of the die cutting is equipped with waste paper conveying device, the paper scraps to the equipment, convenient cleaning.
◇ Optional: die-cut rubber pad roller servo independent drive system.

Die cutting unit

◇ Equipped with imported quick change polyurethane adhesive pad, easy to replace, with one-way clutch as line speed compensation function, can ensure that the adhesive pad worn after the cardboard is completely the same.
◇ Working die-cutting rubber pad drum mechanical spiral left and right automatic transverse movement (± 20mm), so that the incision knife mark is not repeated, prolong the service life of the rubber pad.
◇ The gap between the rubber rollerand the die-cutting roll adopts pneumatic control, normal paper delivery when the rubber roller drops to work ◇ slotted knife wheel form: double knife single axis type.
◇ Press line wheel, blade seat horizontal movement, phase adjustment, reset can be computer control (automatic or manual) electric control, replacement quickly.
◇ Optional: independent servo drive to avoid the impact of die cutting impact

Gluing and transfer unit

◇ Computer control automatically set the body and glue spray position.
◇ Into the paper using electric hair wheel and high pressure blow to cut the Angle waste edge strong cleaning, completely remove the waste edge.
◇ Spring pressurized conveyor wheel without adjusting conveyor belt and board pressure.
◇ Secondary pressure line: the side pressure wheel presses the passing cardboard line again to make the folding more accurate. Servo-motor control.
◇ Optional: Italy ERO, American VALCO and other international famous brand glue spray system, without any setting, automatically adjust the length of the glue line.

Folding and rectifying unit

◇ Strong adsorption fan to ensure the accurate transfer of cardboard in the transmission process.
◇ It can adjust the left and right side correction speed, reduce the occurrence of scissors phenomenon, servo motor control.◇ The active force adopts frequency conversion speed regulating motor to ensure the synchronization with the printing press.
◇ Plug paper check device, automatic emergency stop when the cardboard conveying is not smooth.

 

Counting and outputting unit

◇ The counting and launch section of the fall mode.
◇Three sets of servo motors jointly constitute accurate counting, accumulation and output functions under high-speed operation.
◇ Computer control automatically sets the number of palletizing cartons.
◇Strong wind pressure device, so that the cardboard after the glue to fall smoothly.
◇Fully clap the correction device, effectively improve the scissors phenomenon.
◇The rear gate can be automatically adjusted or manually according to the board specification.
◇Automatic emergency stop when the cardboard is not smooth.

Company profile

OCEAN CARTON MACHINETRY is located in Dongguang County, Hebei Province, we are an intelligent supplier with professional of carton packing research development and production, we are a modern enterprise with integrating design,R&D, production, sales and after-sales, Our production have a reputation for timely delivery ,good service to win the user’s highpraise.ln the future, we will take the market-oriented, science and technology development as main power, sincerely cooperate with the users, constantly updated products, continuously improve the quality of product, perfect after-sales service,sincerelyreturn society.Our company's products are designed and manufactured accordingto European standards. The equipment is exported to more than 60 countries, and more than 20 provinces in China.Many places havesales office and after-sales outlets to provide customers with guarantee services.

Professional team

Our Commitment to Providing Our Customers with Best Services.

★ Our sales team has professional product knowledge and rich application experience. They are optimistic and enthusiastic and provide you with the most thoughtful service.
★ Whenever you have questions about our products after receiving the goods, our after-sales services team will answer your questions patiently and solve your problem promptly.

Certificate

Company exhibition

Ocean Machinery focuses on developing the most cost-effective carton packaging machines, in order to meet customers increasing demands. We provides packaging solutions throughout the world. More than 150 machines have been installed in 50+ countries all over the world, like Japan, America, UK, India, and so on. Both machine performance and customer service have received tons of excellent reviews from our partners and customers.

FAQs

Q: Are you trading company or manufacturer?
A: We are manufacturer, and also provide the business solution to all the friends.

Q: Do you have quality certificate?
A: Yes we have CE, etc.

Q: What's the delivery time?
A: Around 20~30days, however, based on order.

Q: Can you help us to buy other goods?
A: Sure of that, it is our honor to work for you, and control the goods quality.

Q: What's payment terms, trade terms you accept?
A: Usually we appreciate T/T 30% deposit, then 70% balance is paid before shipment , we usually offer FOB tianjin price. but we also accept other way like L/C, wetern union, and do CFR&CIF etc.

Q: Does it easy to operate and what can i do if it doesn't work?
A: We suggest you to come to visit our factory to learn more thing by yourself, and if there is something goes wrong , you can call us, video-chat, email us. And we will give solutions within 36 hrs. Our engineer also can be distributed to overseas as you required.

The whole machine adopts integrated control technology, printing, paste box online control, and unified order management, review, improve production efficiency.